INSTALLATION
Removal / installation · Vehicles built from Jan 2006
| 1. INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY |
Install the windshield washer motor and pump onto the packing of the washer jar.

| 2. INSTALL WINDSHIELD WASHER JAR ASSEMBLY |
Install the windshield washer jar.

Install the 2 bolts.

- Torque:
- 5.5 N*m{ 56 kgf*cm , 48 in.*lbf }
Connect the connector.
Connect the 2 harness clamps.
| 3. FILL UP WASHER JAR AND PUMP ASSEMBLY WITH WASHER FLUID |
Connect the washer hose to the washer motor and pump, and fill the washer jar with washer fluid.
| 4. INSTALL HEADLIGHT ASSEMBLY RH |
w/ Headlight leveling:

Connect the 3 connectors.
w/o Headlight leveling:
Connect the 2 connectors.
Install the headlight with the 2 screws and the bolt.
- Torque:
- 5.0 N*m{ 51 kgf*cm , 44 in.*lbf }
| 5. INSTALL FRONT BUMPER COVER |
Install the 2 clips and the screw grommet.

w/ Fog Light:

Connect the 2 fog light connectors.
Engage the 6 claws and install the front bumper cover.
w/o Fog Light:

Engage the 6 claws and install the front bumper cover.
Install the 6 clips.

Install the 2 screw grommets.
Tighten the 7 screws and 3 bolts.
Remove the protective tape.

| 6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- Torque:
- 5.4 N*m{ 55 kgf*cm , 48 in.*lbf }
