2005-2008 Yaris · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built from Aug 2005


1. INSTALL REAR WIPER RUBBER

E123457E01
  1. Install the 2 wiper rubber backing plates onto the wiper rubber.

    NOTICE:
    Install the backing plates facing the correct direction.

  1. E123458
    Insert the rear wiper rubber from the claw position of the middle of the rear wiper blade to the end.

  1. E123459
    After passing the rear wiper rubber through the rear end side claw, allow it to protrude from the rear end stopper and slide it through the front tip side claw.


2. INSTALL REAR WIPER BLADE ASSEMBLY

E123460
  1. Engage the claw and install the wiper blade.

← REMOVAL (from Aug 2005)COMPONENTS (from Jan 2006) →