2005-2008 Yaris · Service Manual BODY ELECTRICAL

REMOVAL

Removal / installation · Vehicles built from Aug 2005


1. REMOVE REAR WIPER BLADE ASSEMBLY

E123169
  1. Raise the rear wiper blade to the position shown in the illustration, where the meshing of the claw disengages making a clicking sound.

    NOTICE:
    Do not break the claw.

  1. E123455E01
    Pull the rear wiper blade straight away from the wiper arm toward the left side of the vehicle.

    NOTICE:
    Do not bend the rear wiper arm with the rear wiper blade removed, as the arm tip could damage the windshield surface.


2. REMOVE REAR WIPER RUBBER

E123456E01
  1. Pull the end of the wiper rubber protruding from the blade stopper, as shown in the illustration.

    NOTICE:
    Do not pull out the wiper rubber forcibly. Otherwise, the backing plates will be deformed or the blade claw will be damaged.

    HINT:
    Pushing the rubber from the end toward the middle of the rear wiper blade allows it to be removed more easily.

  1. Remove the 2 wiper rubber backing plates from the wiper rubber.

← COMPONENTS (from Aug 2005)INSTALLATION (from Aug 2005) →