2005-2008 Yaris · Service Manual BRAKE

DISASSEMBLY

Removal / installation · Vehicles built from Aug 2005


1. REMOVE REAR DISC BRAKE PISTON

C108952E01
  1. Using SST, remove the piston by turning it counterclockwise.

    SST
    09960-10010   (09963-00400)

    NOTICE:
    1. Do not damage the piston.
    2. Do not spatter the brake fluid.


2. REMOVE CYLINDER BOOT
  1. Remove the cylinder boot from the piston.


3. REMOVE PISTON SEAL

C116888E01
  1. Using a screwdriver with its tip wrapped in protective tape, remove the piston seal from the disc brake cylinder.

    NOTICE:
    Do not damage the inner surface or piston seal groove of the cylinder.


4. REMOVE REAR DISC BRAKE BLEEDER PLUG CAP

5. REMOVE REAR DISC BRAKE BLEEDER PLUG
← REMOVAL (from Aug 2005)INSPECTION (from Aug 2005) →