2005-2008 Yaris · Service Manual TRANSMISSION

REMOVAL

Removal / installation · Vehicles built from Nov 2005


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO.1

  1. B114572
    Remove the 2 screws.

  1. Disengage the 3 claws and remove the instrument panel under cover.


3. SEPARATE CLUTCH MASTER CYLINDER ASSEMBLY

C106350
  1. Remove the spring and clip and remove the push rod clevis pin.

  1. Remove the 2 nuts and separate the push rod clevis from the clutch pedal.


4. REMOVE CLUTCH PEDAL SUPPORT SUB-ASSEMBLY

C106351
  1. Disconnect the clutch start switch connector.

  1. Remove the 2 bolts and the clutch pedal support.


5. REMOVE CLUTCH PEDAL SUB-ASSEMBLY

C106352
  1. Remove the bolt and nut.

  1. Remove the clutch pedal from the clutch pedal support.


6. REMOVE CLUTCH PEDAL SHAFT COLLAR

C106353
  1. Remove the 2 bushes and collar from the clutch pedal.


7. REMOVE CLUTCH PEDAL NO.1 CUSHION

C106354
  1. Remove the clutch pedal No. 1 cushion from the clutch pedal.


8. REMOVE CLUTCH MASTER CYLINDER PUSH ROD CLEVIS BUSH

C108470
  1. Using an 8 mm hexagon wrench and a hammer, remove the clevis bush.


9. REMOVE CLUTCH PEDAL PAD
  1. Remove the clutch pedal pad from the clutch pedal.


10. REMOVE CLUTCH PEDAL STOPPER

11. REMOVE CLUTCH START SWITCH ASSEMBLY

C106355
  1. Remove the nut and the clutch start switch.


12. REMOVE CLUTCH PEDAL STOPPER BOLT

C106356
  1. Loosen the lock nut and remove the clutch pedal stopper bolt.

← ON-VEHICLE INSPECTION (from Nov 2005)INSTALLATION (from Nov 2005) →