2005-2008 Yaris · Service Manual TRANSMISSION

REMOVAL

Removal / installation · Vehicles built from Aug 2005


1. DRAIN BRAKE FLUID

2. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO.1

  1. B114572
    Remove the 2 screws.

  1. Disengage the 3 claws and remove the instrument panel under cover.


3. REMOVE CLUTCH RESERVOIR TUBE

C118343
  1. Loosen the clip and remove the clutch reservoir tube from the clutch master cylinder .

    HINT:
    Use container to collect the fluid.


4. REMOVE CLUTCH MASTER CYLINDER TO FLEXIBLE HOSE TUBE

C118344
  1. Using SST, disconnect the flexible hose tube.

    SST
    09023-00101  

    HINT:
    Use container to collect the fluid.


5. REMOVE CLUTCH MASTER CYLINDER ASSEMBLY

C106350
  1. Remove the spring and clip and remove the push rod clevis pin.

  1. Remove the 2 nuts and the master cylinder.


6. REMOVE CLUTCH MASTER CYLINDER PUSH ROD CLEVIS

C125988E01
  1. Measure the dimension A as shown in the illustration before loosening the lock nut.

  1. Loosen the lock nut and remove the push rod clevis.

  1. Remove the lock nut.

← COMPONENTS (from Aug 2005)INSTALLATION (from Aug 2005) →