REMOVAL
Removal / installation · Vehicles built from Nov 2005
- NOTICE:
- When replacing the master cylinder, check the laser mark on the master cylinder flange portion, and then replace it.
- In the example shown in the illustration, replace the master cylinder with one with part No. 31420-0D070-02.


| Parts No. |
RANK |
ENGINE |
| 31420-0D070-01 |
1 |
1KR-FE |
| 31420-0D070-02 |
2 |
1KR-FE |
| 31420-0D070-03 |
3 |
1KR-FE |
| 31420-0D090-01 |
1 |
1ND-TV |
| 31420-0D090-02 |
2 |
1ND-TV |
| 31420-0D090-03 |
3 |
1ND-TV |
| 31420-0D080-01 |
1 |
2SZ-FE |
| 31420-0D080-02 |
2 |
2SZ-FE |
| 31420-0D080-03 |
3 |
2SZ-FE |
| 1. DRAIN BRAKE FLUID |
| 2. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO.1 |
Remove the 2 screws.

Disengage the 3 claws and remove the instrument panel under cover.
| 3. REMOVE CLUTCH RESERVOIR TUBE |
![]() ![]() |
Loosen the clip and remove the clutch reservoir tube from the clutch master cylinder.
- HINT:
- Use a container to collect the fluid.
| 4. REMOVE CLUTCH MASTER CYLINDER TO FLEXIBLE HOSE TUBE |
![]() ![]() |
Using SST, disconnect the flexible hose tube.
- SST
- 09023-00101
- HINT:
- Use a container to collect the fluid.
| 5. REMOVE CLUTCH MASTER CYLINDER ASSEMBLY |
![]() ![]() |
Remove the spring and clip and remove the push rod clevis pin.
Remove the 2 nuts and the master cylinder.



