2005-2008 Yaris · Service Manual TRANSMISSION

DISASSEMBLY

Removal / installation · Vehicles built from Aug 2005


1. REMOVE CLUTCH RELEASE CYLINDER KIT
  1. Remove the boot from the cylinder body.

  1. Remove the push rod from the cylinder body.

  1. Remove the piston from the cylinder body.

    NOTICE:
    Do not damage the inside of the cylinder body.

  1. Remove the spring from the cylinder body.

  1. Remove the bleeder plug cap from the bleeder plug.


2. REMOVE RELEASE CYLINDER BLEEDER PLUG
← REMOVAL (from Aug 2005)REASSEMBLY (from Aug 2005) →