REASSEMBLY
Removal / installation · Vehicles built from Aug 2005
| 1. INSTALL RELEASE CYLINDER BLEEDER PLUG |
- Torque:
- 8.3 N*m{ 85 kgf*cm , 73 in.*lbf }
| 2. INSTALL CLUTCH RELEASE CYLINDER KIT |
Install the bleeder plug cap onto the bleeder plug.
Install a new spring onto the cylinder body.
Coat the parts with lithium soap base glycol grease, as shown in the illustration.

Install the piston onto the cylinder body.
- NOTICE:
- Do not damage the inside of the cylinder body.
Install the push rod onto the cylinder body.
Install the boot onto the cylinder body.
