Removal / installation · Vehicles built from Nov 2006
1.
REMOVE FRONT BUMPER COVER
Apply protective tape as shown in the illustration.
Remove the 5 screws and the 3 bolts.
Remove the 2 screw grommets.
Remove the 7 clips.
Using a screwdriver with its tip wrapped in protective tape, disengage the 6 claws and remove the front bumper cover.
Disconnect the 2 fog light connectors.
2.
REMOVE RADIATOR GRILLE EMBLEM
Disengage the 4 claws and remove the radiator grille emblem.
3.
REMOVE RADIATOR GRILLE NO. 2 EMBLEM
Disengage the 4 claws and remove the radiator grille No. 2 emblem.
4.
REMOVE SYMBOL EMBLEM
Apply protective tape to the back door panel in the area around the symbol emblem.
Using an infrared light, heat the symbol emblem.
CAUTION:
Do not burn yourself with the heated back door panel or infrared light.
HINT:
Heat at 40 to 60°C (104 to 140°F) for 1 to 2 minutes.
Using a gasket scraper with its tip wrapped in protective tape, gradually peel the adhesive surface and remove the symbol emblem.
Remove the protective tape.
5.
REMOVE LUGGAGE COMPARTMENT DOOR NO. 1 NAME PLATE
Apply protective tape to the back door panel in the area around the luggage compartment door No. 1 name plate.
Using an infrared light, heat the luggage compartment door No. 1 name plate.
CAUTION:
Do not burn yourself with the heated back door panel or infrared light.
HINT:
Heat at 40 to 60°C (104 to 140°F) for 1 to 2 minutes.
Using a gasket scraper with its tip wrapped in protective tape, gradually peel the adhesive surface and remove the luggage compartment door No. 1 name plate.
Remove the protective tape.
6.
REMOVE LUGGAGE COMPARTMENT DOOR NO. 2 NAME PLATE
Apply protective tape to the back door panel in the area around the luggage compartment door No. 2 name plate.
Using an infrared light, heat the luggage compartment door No. 2 name plate.
CAUTION:
Do not burn yourself with the heated back door panel or infrared light.
HINT:
Heat at 40 to 60°C (104 to 140°F) for 1 to 2 minutes.
Using a gasket scraper with its tip wrapped in protective tape, gradually peel the adhesive surface and remove the luggage compartment door No. 2 name plate.