2005-2008 Yaris · Service Manual BODY

REMOVAL

Removal / installation · Vehicles built from Aug 2005

HINT:
The procedure described below is for the LH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.


1. REMOVE ROOF DRIP SIDE FINISH MOULDING

  1. B114412E01
    Apply protective tape to the roof panel in the area around the roof drip side finish moulding.

  1. B114413
    Disengage the 2 clips and remove the roof drip side finish moulding.

    NOTICE:
    1. Do not remove the clips.
    2. Replace the clips with supply clips if damaged.

← COMPONENTS (from Aug 2005)INSTALLATION (from Aug 2005) →