REMOVAL
Removal / installation · Vehicles built from Jan 2006
- HINT:
- The procedure described below is for the LH side. Use the same procedure for the RH and LH sides, unless otherwise specified.
| 1. REMOVE NO. 3 BLACK OUT TAPE |
Using an infrared light, heat the No. 3 black out tape.

- NOTICE:
- Do not burn yourself with the heated front door panel or infrared light.
- HINT:
- Heat at 40 to 60°C (104 to 140°F) for 3 to 5 minutes.
Lift the end portion with your nail and peel it parallel to the attachment surface.
