SYSTEM DESCRIPTION
Troubleshooting · Vehicles built from Aug 2005
| METER GAUGE AND WARNING INDICATOR |
*2: w/ ABS
*1: w/ Daytime running light system
*2: w/o Daytime running light system
*3: w/ Entry and start system
*4: for Europe, G.C.C. countries, Australia and South Africa
*5: w/ VSC
*6: w/ ABS
*7: for G.C.C. countries
*8: for 1ND-TV
*9: for MMT
*10: w/ ABS or w/ VSC
*1: w/o Entry and start system
*2: Europe, Australia and South Africa
*3: w/ Entry and start system
*4: w/ VSC
*5: for G.C.C. countries
*6: for A/T
*7: for MMT
| Item |
Signal Description |
| Speedometer |
Indicates vehicle speed based on signals received from ABS and traction actuator assembly (*1) / brake actuator assembly (*2) (CAN) |
| Tachometer |
Indicates engine speed based on signals from ECM (CAN) |
| Fuel Gauge |
Indicates fuel level in accordance with signals received from fuel sender gauge (Direct line) |
| ODO/TRIP meter |
Calculates accumulated total vehicle travel distance and vehicle travel distance since trip meter knob pressed |
| Item |
Signal Description |
| TURN SIGNAL |
Receives turn signal from flasher relay (Direct line) |
| BEAM |
Receives beam signal from headlight dimmer switch (*1) (Direct line) Receives beam signal from DRL relay (*2) |
| FRONT FOG LIGHT |
Receives front fog light signal from fog light relay (Direct line) |
| REAR FOG LIGHT |
Receives rear fog light signal from rear fog light relay (Direct line) |
| CHARGE |
Receives malfunction signal from generator (alternator) (Direct line and CAN) |
| MIL |
Receives malfunction check engine warning signal from ECM (Direct line) |
| Engine coolant temperature warning |
Receives engine coolant temperature warning signal from ECM (CAN) |
| Engine coolant temperature COOL |
Receives engine coolant temperature indicator signal from ECM (CAN) |
| DOOR |
Open door indicator illuminates when receiving signal from main body ECU (CAN) |
| ENTRY KEY (*3) |
Receives signal from certification ECU (CAN) |
| D BELT (*4) |
Receives driver seat belt warning signal (unfastened) from main body ECU (CAN) |
| BRAKE |
Receives parking brake switch signal from main body ECU (CAN) and fluid level warning signal from brake level switch (Direct line) |
| OIL PRESSURE |
Receives engine oil pressure warning signal from engine oil pressure switch (Direct line) |
| AIR BAG |
Receives malfunction signal from airbag ECU (CAN) |
| SLIP (*5) |
Receives malfunction signal from ABS and traction actuator assembly (CAN) |
| VSC (*5) |
Receives malfunction signal from ABS and traction actuator assembly ECU (CAN) |
| ABS (*10) |
Receives malfunction signal from ABS and traction actuator assembly (*5) / brake actuator assembly (*6) (CAN) |
| TAIL |
Receives malfunction signal from taillight relay (*1) (Direct line) Receives malfunction signal from DRL relay (*2) (Direct line) |
| P/S |
Receives malfunction signal from power steering ECU (CAN) |
| SPEED WARNING (*7) |
Receives malfunction signal from brake actuator assembly (CAN) |
| OIL LEVEL (*8) |
Receives the engine oil level signal from the engine oil level sensor (Direct line) |
| SEDIMENT (*8) |
Receives the sedimenter signal /fuel filter signal from the fuel sedimenter switch/ fuel filter switch (Direct line) |
| GLOW (*8) |
Receives the glow signal from the ECM (CAN) |
| OIL MAINT (*8) |
Receives oil maintenance signal from the ECM (CAN) |
| Es (*9) |
Illuminates when sporty (Es) pattern is selected during normal (E) pattern driving in E mode. |
| GER (*9) |
Warning is displayed when multi-mode manual transmission ECU malfunctions. |
| Item |
Signal Description |
| KEY Reminder (*1) |
Buzzer ON: Ignition switch off, key inserted, and door open |
| Seat Belt Warning (*2) |
Buzzer ON: Receives malfunction signal from main body ECU |
| LIGHT Reminder |
Buzzer ON: When ignition switch off, light control switch in TAIL position, and driver side door open. |
| ENTRY KEY Warning (*3) |
Buzzer ON: Receives signal from certification ECU. |
| SLIP Warning (*4) |
Buzzer ON: Receives signal from ABS and traction actuator. |
| SPEED Waning (*5) |
Buzzer ON: When vehicle speed is beyond 120.5km/h (75mph). |
| A/T Reverse (*6) |
Buzzer ON: Receives signal from the ECM. |
| MMT (*7) |
Buzzer ON: Receives signal from the multi-mode manual transmission ECU. |
| MULTI-INFORMATION DISPLAY |


- HINT:
- When the display change switch is pressed, the multi-information display changes in the following sequence:
- - Ambient temperature
- - Instantaneous fuel consumption
- - Average fuel consumption since refueling
- - Possible travel distance
- - Average vehicle speed since starting
| MULTI-INFORMATION DISPLAY FLOW CHART |
*2: The display change switch is pressed continuously for 0.8 seconds or more.
*3: No operation.
*4: The DISP switch is pressed continuously for longer periods of time.

