B1499/99 Multiplex Communication Circuit
Diagnostic trouble codes · Vehicles built from Aug 2005
DESCRIPTION
The air conditioner amplifier communicates data with the ECM and combination meter assembly through the CAN communication system.| DTC No. |
DTC Detection Condition |
Trouble Area |
| B1499/99 |
Open in CAN communication line |
|
WIRING DIAGRAM


INSPECTION PROCEDURE
| 1. CHECK DTC OUTPUT |
Clear the DTC.
Connect an intelligent tester to the DLC3 with the ignition switch off.
Turn the ignition switch on (IG) and turn the intelligent tester ON.
Clear the DTC by following the prompts on the tester screen.
- HINT:
- Refer to the intelligent tester operator's manual for further details.
Read the DTC.
Connect an intelligent tester to the DLC3 with the ignition switch off.
Turn the ignition switch on (IG) and turn the intelligent tester ON.
Read the DTC by following the prompts on the tester screen.
- HINT:
- Refer to the intelligent tester operator's manual for further details.
- Result:
Result
Proceed to
DTC (B1499/99) is output
A
DTC (B1499/99) is not output
B
|
|
||||
| A | ||
| ||
