2005-2008 Yaris · Service Manual BODY ELECTRICAL

HOW TO PROCEED WITH TROUBLESHOOTING

Troubleshooting · Vehicles built from Aug 2005

HINT:
  1. Use these procedures to troubleshoot the lighting system.
  2. Use an intelligent tester in step 4.


1.VEHICLE BROUGHT TO WORKSHOP
    NEXT

    2.INSPECT BATTERY VOLTAGE

      Standard voltage:
      11 to 14 V

      If the voltage is below 11 V, recharge or replace the battery before proceeding.
    NEXT

    3.REFER TO PROBLEM SYMPTOMS TABLE
      Result
      Proceed to
      Fault is not listed in problem symptoms table
      A
      Fault is listed in problem symptoms table
      B

    B.
    A

    4.OVERALL ANALYSIS AND TROUBLESHOOTING
    1. Data List/Active Test (Click here).

    2. Terminals of ECU (Click here).

    NEXT

    5.ADJUST, REPAIR OR REPLACE
      NEXT

      6.CONFIRMATION TEST
        NEXT

        ← SYSTEM DESCRIPTION (from Aug 2005)CUSTOMIZE PARAMETERS (from Aug 2005) →