2005-2008 Yaris · Service Manual TRANSMISSION

DISASSEMBLY

Removal / installation · Vehicles built from Aug 2005


1. REMOVE REVERSE CLUTCH DISC

C059951
  1. Using a screwdriver, remove the snap ring.

  1. Remove the flange, 2 discs and 2 plates from the intermediate shaft.


2. REMOVE FRONT CLUTCH CLUTCH DISC

C059952
  1. Using a screwdriver, remove the snap ring.

  1. Remove the flange, 4 plates and 4 discs from the intermediate shaft.


3. REMOVE CLUTCH BALANCER NO. 1

D025202E01
  1. Using SST, a press and snap ring pliers, remove the snap ring.

  1. Remove clutch balancer No. 1 from the intermediate shaft.

    SST
    09387-00020  


4. REMOVE FORWARD CLUTCH RETURN SPRING SUB-ASSEMBLY

C059954
  1. Remove the forward clutch return spring from the intermediate shaft.


5. REMOVE FORWARD CLUTCH PISTON

C059955
  1. Apply compressed air to the transaxle rear cover to remove the forward clutch piston.


6. REMOVE CLUTCH DRUM SUB-ASSEMBLY

C059956
  1. Apply compressed air to the transaxle rear cover to remove the clutch drum.


7. REMOVE FORWARD CLUTCH PISTON O-RING

C059957
  1. Using a screwdriver, remove the forward clutch piston O-ring from the intermediate shaft.


8. REMOVE FRONT CLUTCH DRUM O-RING

C059958
  1. Using a screwdriver, remove the front drum O-ring from the clutch drum.


9. REMOVE INTERMEDIATE SHAFT OIL SEAL RING

C059959
  1. Using a screwdriver, remove the intermediate shaft oil seal ring from the intermediate shaft.

← COMPONENTS (from Aug 2005)INSPECTION (from Aug 2005) →