INSPECTION
Inspection · Vehicles built from Aug 2005
| INSPECT REVERSE CLUTCH DISC |
![]() ![]() |
Check whether the sliding surface of the disc, plate and flange are worn or burnt.
If necessary, replace them.- NOTICE:
- If the lining of the disc is peeling off or discolored, or even if a part of the printed number is defaced, replace all the discs.
- Before assembling new discs, soak them in ATF for at least 15 minutes.
- If the lining of the disc is peeling off or discolored, or even if a part of the printed number is defaced, replace all the discs.
| INSPECT FRONT CLUTCH CLUTCH DISC |
![]() ![]() |
Check whether the sliding surfaces of the disc, plate and flange are worn or burnt.
If necessary, replace them.- NOTICE:
- If the lining of the disc is peeling off or discolored, or even if a part of the printed number is defaced, replace all the discs.
- Before assembling new discs, soak them in ATF for at least 15 minutes.
- If the lining of the disc is peeling off or discolored, or even if a part of the printed number is defaced, replace all the discs.
| INSPECT FORWARD CLUTCH RETURN SPRING SUB-ASSEMBLY |
![]() ![]() |
Using vernier calipers, measure the free length of the spring together with the spring seat.
- Standard free length:
- 24.04 mm (0.9465 in.)




