2005-2008 Yaris · Service Manual TRANSMISSION

DISASSEMBLY

Removal / installation · Vehicles built from Aug 2005


1. REMOVE FRONT DRIVE PINION REAR TAPERED ROLLER BEARING

D025207E01
  1. Using SST and a press, remove the front drive pinion rear tapered roller bearing (inner race) and counter driven gear from the differential drive pinion.

    SST
    09950-00020  
    09950-60010   (09951-00280)
    09950-70010   (09951-07100)

  1. D025208E02
    Using SST, remove the front drive pinion rear tapered roller bearing (outer race) and drive pinion washer from the transaxle case.
    SST
    09387-00041   (09387-01030, 09387-01040, 09387-02010, 09387-02020)


2. REMOVE FRONT DRIVE PINION FRONT TAPERED ROLLER BEARING

D025209E01
  1. Using SST and a press, remove the front drive pinion front tapered roller bearing (inner race) from the differential drive pinion.

    SST
    09950-00020  
    09950-60010   (09951-00280)
    09950-70010   (09951-07100)

  1. D025210E01
    Using SST, remove the front drive pinion front tapered roller bearing (outer race) from the transaxle housing.
    SST
    09387-00041   (09387-01030, 09387-01040, 09387-02020)
    09316-20011  


3. REMOVE DIFFERENTIAL DRIVE PINION PLUG

C059995
  1. Using an extension bar and a hammer, remove the differential drive pinion plug.


4. REMOVE FRONT DIFFERENTIAL RING GEAR

C123272
  1. Place matchmarks on the front differential ring gear and the differential case.

  1. Remove the 8 bolts.

  1. Using a plastic hammer, remove the front differential ring gear.


5. REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING

D025211E01
  1. Using SST, remove the front differential case front tapered roller bearing (inner race) from the differential case.

    SST
    09950-40011   (09951-04020, 09952-04010, 09953-04020, 09954-04010, 09955-04061, 09957-04010, 09958-04011)
    09950-60010   (09951-00340)

  1. D025212E01
    Using SST, remove the front differential case front tapered roller bearing (outer race) and differential case washer.
    SST
    09387-00041   (09387-01030, 09387-01040, 09387-02010, 09387-02020)


6. REMOVE SPEEDOMETER DRIVE GEAR

C123273
  1. Remove the speedometer drive gear from the differential case.


7. REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING

D025213E01
  1. Using SST, remove the front differential case rear tapered roller bearing (inner race) from the differential case.

    SST
    09950-40011   (09951-04020, 09952-04010, 09953-04020, 09954-04010, 09955-04061, 09957-04010, 09958-04011)
    09950-60010   (09951-00340)

  1. D025214E01
    Using SST, remove the front differential case rear tapered roller bearing (outer race) and differential case washer.
    SST
    09387-00041   (09387-01030, 09387-01040, 09387-02010, 09387-02020)


8. REMOVE FRONT DIFFERENTIAL PINION SHAFT STRAIGHT PIN

C059843
  1. Using a punch and hammer, loosen the staked part of the differential case.

  1. C059998
    Using a 3 mm pin punch and hammer, remove the pinion shaft straight pin.


9. REMOVE FRONT DIFFERENTIAL PINION SHAFT NO. 1

C060001
  1. Remove front differential pinion shaft No. 1 from the differential case.


10. REMOVE FRONT DIFFERENTIAL SIDE GEAR

C060002
  1. Remove the 2 front differential pinions, 2 pinion thrust washers, 2 front differential side gears and 2 side gear thrust washers from the differential case.

← COMPONENTS (from Aug 2005)REASSEMBLY (from Aug 2005) →