2005-2008 Yaris · Service Manual RESTRAINTS

REMOVAL

Removal / installation · Vehicles built from Jan 2006

CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing (Click here).

NOTICE:
Always use "Torx" socket wrench E10 when removing the rear seat.

HINT:
The procedure described below is for the RH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait for at least 90 seconds after disconnecting the cable to prevent the airbag from working.


2. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Package Tray Trim)

  1. B114569E01
    Remove the 2 package tray trim suspenders.

  1. Remove the 5 pieces of hook tape.

  1. Disengage the 2 claws and remove the package tray trim.


3. REMOVE DECK BOARD SUB-ASSEMBLY (w/ Deck Board)

  1. B106371
    Release the 2 knobs and remove the deck board.


4. REMOVE SPARE WHEEL COVER ASSEMBLY (w/ Deck Board)

  1. B138393
    Remove the spare wheel cover.


5. REMOVE DECK FLOOR BOX (w/ Deck Board)
  1. for RH Side:

    1. Remove the deck floor box (Click here).

  1. for LH Side:

    1. Remove the deck floor box.

      HINT:
      Use the same procedure as for the RH side.


6. REMOVE REAR FLOOR CARPET ASSEMBLY (w/o Deck Board)

  1. B138392
    Remove the rear floor carpet.


7. REMOVE REAR SEAT LEG COVER
  1. for RH Side:

    1. Remove the rear seat leg cover (Click here).

  1. for LH Side:

    1. Remove the rear seat leg cover (Click here).


8. REMOVE REAR SEAT ASSEMBLY
  1. for RH Side:

    1. Remove the rear seat assembly (Click here).

  1. for LH Side:

    1. Remove the rear seat assembly (Click here).


9. REMOVE FRONT DOOR SCUFF PLATE

  1. B114494
    Disengage the 8 claws and remove the front door scuff plate.


10. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP

  1. B114477
    Remove the front door opening trim weatherstrip to the extent that the front quarter trim panel can be removed.


11. REMOVE REAR SEAT OUTER BELT ASSEMBLY

  1. B114498
    Remove the belt.


12. REMOVE FRONT SEAT OUTER BELT BAR SUB-ASSEMBLY

  1. B114759
    Remove the 2 bolts and the front seat outer belt bar.


13. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY

  1. B114499
    Disengage the 8 clips, the retainer and the 10 claws and remove the front quarter trim panel.


14. REMOVE SEAT BELT ANCHOR COVER CAP

  1. B114478
    Disengage the 3 claws and remove the seat belt anchor cover cap.


15. REMOVE FRONT SEAT OUTER BELT ASSEMBLY

  1. B114479
    Remove the bolt and the through anchor.

  1. B114422E01
    Disconnect the pretensioner connector.

    1. Using a screwdriver, release the locking button.

    2. Using a screwdriver, disconnect the pretensioner connector.

  1. B114423
    Remove the 2 bolts, the 2 hooks and the retractor.

← COMPONENTS (from Jan 2006)INSTALLATION (from Jan 2006) →