INSTALLATION
Removal / installation · Vehicles built from Aug 2005
| 1. INSTALL BACK DOOR LOCK ACTUATOR ASSEMBLY (w/o Entry and Start System) |
![]() ![]() |
Install the back door lock actuator with the 2 bolts.
- Torque:
- 7.0 N*m{ 71 kgf*cm , 62 in.*lbf } (for TMC Made)
- Torque:
- 7.5 N*m{ 76 kgf*cm , 66 in.*lbf } (for TMMF Made)
Connect the connector.
| 2. INSTALL BACK DOOR LOCK ASSEMBLY |
![]() ![]() |
Install the back door lock with the 3 bolts.
- Torque:
- 7.5 N*m{ 76 kgf*cm , 66 in.*lbf }
Connect the connector and the clamp.
| 3. INSTALL BACK DOOR TRIM BOARD ASSEMBLY |
![]() ![]() |
Engage the 3 claws and 9 clips and install the back door trim board.
Slide the handle plate of the back door trim board to engage it.

| 4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- Torque:
- 5.4 N*m{ 55 kgf*cm , 48 in.*lbf }



