2005-2008 Yaris · Service Manual BODY ELECTRICAL

INSPECTION

Inspection · Vehicles built from Aug 2005


INSPECT BACK DOOR LOCK ASSEMBLY (w/ Entry and Start System)

E107946E01
  1. Check the operation.

    1. Using a screwdriver, operate the latch and lock it.

    2. Connect the cable from the positive battery (+) terminal to terminal 4 and the negative battery (-) terminal to terminal 3, then check the operation of the latch.

      Standard:
      The latch unlocks.


INSPECT BACK DOOR LOCK ACTUATOR ASSEMBLY (w/o Entry and Start System)

B107876E01
  1. Check the operation.

    1. Apply battery voltage to the back door lock actuator and check the operation of the back door lock motor.

      Standard:
      Measurement Condition
      Specified Condition
      Battery positive (+) → Terminal 2
      Battery negative (-) → Terminal 1
      Unlocks
      Battery positive (+) → Terminal 1
      Battery negative (-) → Terminal 2
      Locks

      If the result is not as specified, replace the back door lock actuator.

← REMOVAL (from Aug 2005)INSTALLATION (from Aug 2005) →