2005-2008 Yaris · Service Manual BODY ELECTRICAL

INSPECTION

Inspection · Vehicles built from Aug 2005


INSPECT UN-LOCK WARNING SWITCH ASSEMBLY

E105271E01
  1. Check the resistance.

    1. Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      1 - 2
      Pin released
      10 kΩ or higher
      1 - 2
      Pin pushed in
      Below 1 Ω

      If the result is not as specified, replace the unlock warning switch.

← REMOVAL (from Aug 2005)INSTALLATION (from Aug 2005) →