REMOVAL
Removal / installation · Vehicles built from Aug 2005
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE STEERING COLUMN COVER |
![]() ![]() |
Turn the steering wheel to the right and remove the screw indicated in the illustration.
Turn the steering wheel to the left and remove the screw indicated in the illustration.

Remove the screw indicated in the illustration and remove the steering column cover.

| 3. REMOVE UN-LOCK WARNING SWITCH ASSEMBLY |
![]() ![]() |
Insert the key into the ignition key cylinder.
Disconnect the connector.
Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the unlock warning switch.


