B1497/97 BUS IC Communication Malfunction
Diagnostic trouble codes · Vehicles built from Aug 2005
DESCRIPTION
The air conditioning harness connects the air conditioning amplifier and the servos. The air conditioning amplifier supplies power and sends operation instructions to each servo through the air conditioning harness. Each servo sends damper position information to the air conditioning amplifier.| DTC No. |
DTC Detection Condition |
Trouble Area |
| B1497/97 |
Communication line error or open |
|
WIRING DIAGRAM


INSPECTION PROCEDURE
| 1. INSPECT AIR CONDITIONING AMPLIFIER |
![]() ![]() |
Remove the air conditioning amplifier with its connectors still connected.
Measure the resistance.
- Standard resistance:
Tester Connection
Specified Condition
T1-2 (BUS G) - Body ground
Below 1 Ω
Reinstall the air conditioning amplifier.
|
|
||||
| OK | |
| 2. INSPECT AIR CONDITIONING AMPLIFIER |
![]() ![]() |
Remove the air conditioning amplifier with its connectors still connected.
Measure the voltage.
- Standard voltage:
Tester Connection
Condition
Specified Condition
T1-2 (BUS G) - T1-4 (B BUS)
Always
11 to 13 V
Reinstall the air conditioning amplifier.
|
|
||||
| OK | ||
| ||


