REMOVAL
Removal / installation · Vehicles built from Aug 2005
| 1. REMOVE BATTERY |
![]() ![]() |
Disconnect the negative battery terminal.
Disconnect the positive battery terminal.
Loosen the nut, and remove the battery carrier clamp.

Remove the battery from the vehicle.
| 2. REMOVE BATTERY TRAY |
| 3. REMOVE FLYWHEEL HOUSING SIDE COVER |
![]() ![]() |
Disengage the claw while pushing it downward and remove the flywheel housing side cover.
| 4. REMOVE STARTER ASSEMBLY |
![]() ![]() |
Separate the harness clamp.
Remove the bolt and remove the wire harness bracket.

Remove the terminal cap.

Separate the harness clamp.
Remove the nut and disconnect terminal 30.
Disconnect the connector.
Remove the 2 bolts and remove the starter assembly.



