2005-2008 Yaris · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Nov 2005


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE ENGINE COVER SUB-ASSEMBLY NO. 1

  1. A125743
    Disengage the 4 pins and remove engine cover No. 1.


3. REMOVE ENGINE UNDER COVER
  1. Remove the 5 bolts, 4 screws and 2 clips and remove the engine under cover.


4. REMOVE FLYWHEEL HOUSING SIDE COVER

A128364E01
  1. Disengage the claw while pushing it downward and remove the flywheel housing side cover.


5. REMOVE STARTER ASSEMBLY (C53A)

A128366
  1. Separate the harness clamp.

  1. Remove the bolt and remove the wire harness bracket.

  1. A128367
    Remove the terminal cap.

  1. Separate the harness clamp.

  1. Remove the nut and disconnect terminal 30.

  1. Disconnect the connector.

  1. Remove the 2 bolts and remove the starter assembly.


6. REMOVE STARTER ASSEMBLY (C53)

A128367
  1. Remove the terminal cap.

  1. Separate the harness clamp.

  1. Remove the nut and disconnect terminal 30.

  1. Disconnect the connector.

  1. Remove the 2 bolts and remove the starter assembly.

← COMPONENTS (from Nov 2005)DISASSEMBLY (from Nov 2005) →