DISASSEMBLY
Removal / installation · Vehicles built from Nov 2005
| 1.
REMOVE STARTER YOKE ASSEMBLY |
 |
Remove the nut and disconnect the lead wire from terminal C.
Remove the 2 bolts and starter stay, and pull out the starter commutator end frame together with the starter yoke assembly.
Remove the O-ring from the starter yoke assembly.
- Remove the 2 screws and pull out the starter commutator end frame.
Remove the O-ring from the starter yoke assembly.
| 2.
REMOVE STARTER BRUSH HOLDER ASSEMBLY |
 |
- Using a screwdriver, disconnect the 4 brushes from the starter brush holder assembly.
| 3.
REMOVE STARTER ARMATURE ASSEMBLY |
 |
Remove the starter armature from the starter yoke assembly.
| 4.
REMOVE MAGNET STARTER SWITCH ASSEMBLY |
 |
Remove the 2 bolts and the magnet starter switch assembly.
| 5.
REMOVE STARTER CLUTCH SUB-ASSEMBLY |
 |
Remove the magnetic switch return spring from the starter clutch.
Remove the starter clutch from the starter drive housing assembly.
Remove the 2 starter idle pinions from the starter drive housing assembly.
- Using a magnetic finger, remove the ball from the starter clutch sub-assembly.