2005-2008 Yaris · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Aug 2005


INSPECT STARTER CUT RELAY

E034090E03
  1. Check the resistance.

    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance:
      Tester Connection
      Specified Condition
      3 - 5
      Below 1Ω (when battery voltage applied to terminals 1 and 2)
      10 kΩ or higher

      If the result is not as specified, replace the relay.

← REMOVAL (from Aug 2005)INSTALLATION (from Aug 2005) →