REMOVAL
Removal / installation · Vehicles built from Aug 2005
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE FAN AND GENERATOR V BELT |
![]() ![]() |
Loosen bolt A.
Loosen bolt B.
Loosen bolt C.
Release the drive belt tension and remove the fan and generator V belt.
| 3. REMOVE GENERATOR ASSEMBLY |
![]() ![]() |
Remove the terminal cap.
Separate the connector and 2 harness clamps.
Remove the nut and remove terminal B.
Remove fan belt adjusting slider fixing bolts A and B and remove the fan belt adjusting bar assembly.

Remove fixing bolt B and remove the generator.



