INSTALLATION
Removal / installation · Vehicles built from Aug 2005
- CAUTION:
- Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing.
| 1. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY |
![]() ![]() |
Engage the 6 claws.
Install the driver side knee airbag assembly with the 4 bolts.
- Torque:
- 10 N*m{ 102 kgf*cm , 7 ft.*lbf }
| 2. INSTALL INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY LH |
Engage the 3 claws and install the instrument panel under cover.

Tighten the 2 screws.
| 3. INSTALL STEERING COLUMN COVER |
Engage the 2 claws and install the steering column cover (lower).

Tighten the 3 screws.
| 4. INSTALL STEERING COLUMN COVER SUPPORT (w/ Entry and Start System) |
![]() ![]() |
Engage the 4 claws to install the steering column cover support.
| 5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- Torque:
- 5.4 N*m{ 55 kgf*cm , 48 in.*lbf }
| 6. INSPECT SRS WARNING LIGHT |


