2005-2008 Yaris · Service Manual SUSPENSION & AXLE

INSTALLATION

Removal / installation · Vehicles built from Jan 2006


1. INSTALL REAR AXLE HUB BOLT

C121819E01
  1. Install the washer and the nut onto a new hub bolt as shown in the illustration.

  1. Using a screwdriver or the equivalent to hold the hub and bearing, install the hub bolt by tightening the nut.


2. INSTALL REAR BRAKE DRUM SUB-ASSEMBLY

3. ADJUST REAR DRUM BRAKE SHOE CLEARANCE

F040023E03
  1. Provisionally install the 2 hub nuts.

  1. Remove the hole plug, and turn the adjuster to expand the shoe until the drum locks.

  1. Using a screwdriver, release the adjuster 12 notches.

  1. Install the hole plug.


4. INSTALL REAR WHEEL

Torque:
103 N*m{ 1,050 kgf*cm , 76 ft.*lbf }

← REMOVAL (from Jan 2006)COMPONENTS (from Aug 2005) →