2005-2008 Yaris · Service Manual SUSPENSION & AXLE

REMOVAL

Removal / installation · Vehicles built from Jan 2006


1. REMOVE REAR WHEEL

2. REMOVE REAR BRAKE DRUM SUB-ASSEMBLY
  1. Release the parking brake and remove the rear brake drum.
    If the rear brake drum cannot be removed easily, perform the following procedure.

  1. F046068E02
    Remove the hole plug and insert a screwdriver through the hole into the backing plate, and hold the automatic adjust lever away from the adjuster.

  1. Using another screwdriver, contract the brake shoe by turning the adjusting bolt.


3. REMOVE REAR AXLE HUB BOLT

C121818
  1. Using SST and a screwdriver or the equivalent, remove the hub bolt.

    SST
    09628-10011  

← COMPONENTS (from Jan 2006)INSTALLATION (from Jan 2006) →