INSTALLATION
Removal / installation · Vehicles built from Aug 2005
| 1. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY |
![]() ![]() |
Install the power window regulator master switch with the 3 screws.
| 2. INSTALL FRONT ARMREST BASE PANEL UPPER |
![]() ![]() |
Connect the connector.
Engage the 5 claws and clip and install the front armrest base panel upper.
| 3. INSTALL DOOR ARMREST COVER |
![]() ![]() |
for 5 Door:
Engage the 8 claws and 3 clips and install the door armrest cover.
for 3 Door:

Engage the 12 claws and 4 clips and install the door armrest cover.
| 4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- Torque:
- 5.4 N*m{ 55 kgf*cm , 48 in.*lbf }



