2005-2008 Yaris · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built from Aug 2005


1. INSTALL TRANSMITTER BATTERY

B127225

  1. for Europe:
    Install the transmitter battery.

    1. Install a battery (lithium battery: CR1616).

      NOTICE:
      Face the battery upward. Take care not to deform the terminals.

    2. B127224
      Check that the O-ring is not distorted or slipped off, and install the cover.

    3. B127631
      Assemble the door control transmitter module into the key plate and the cover.

    4. Tighten the screw.

      NOTICE:
      When the screw is tightened loosely, it may cause faulty connection between the battery (lithium battery: CR1616) and the terminals.

  1. B107848
    except for Europe:
    Install the transmitter battery.

    1. Install a battery (lithium battery: CR2016) with the positive (+) side up, as shown in the illustration.

      NOTICE:
      1. Make sure that the positive (+) side and the negative (-) side of the transmitter battery are correctly matched up with the transmitter terminals.
      2. Do not bend the transmitter battery electrode during insertion.
      3. Keep the transmitter cover interior free of dust and oil.

    2. B107847
      Install the cover securely.

    3. B107830
      Install the door control transmitter module into the transmitter housing case.

    4. B107831
      Install the transmitter housing cover onto the transmitter housing case securely.

    5. After installation, press any of the transmitter switches. Check that the LED illuminates.

← REMOVAL (from Aug 2005)COMPONENTS (from Nov 2005) →