REMOVAL
Removal / installation · Vehicles built from Aug 2005
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE HEATED OXYGEN SENSOR |
Disconnect the sensor connector and disengage the 3 clamps.

Using SST, remove heated oxygen sensor No. 2.

- SST
- 09224-00010
| 3. REMOVE EXHAUST PIPE ASSEMBLY FRONT |
Remove the 4 bolts and 4 compression springs.
Remove exhaust pipe support No. 4 and the exhaust front pipe assembly.


Remove the 2 exhaust pipe gaskets.
| 4. REMOVE EXHAUST PIPE ASSEMBLY TAIL |
Remove the 2 exhaust pipe support No. 4 and the exhaust tail pipe assembly.


