ON-VEHICLE INSPECTION
Inspection · Vehicles built from Aug 2005
| INSPECT MAIN BODY ECU (DEFOGGER RELAY) |
![]() ![]() |
Remove the DEF fuse.
Using an ohmmeter, measure the resistance between the terminals of the DEF fuse.
- Standard Resistance:
- Below 1 Ω
Install the DEF fuse.
Using an ohmmeter, measure the resistance between terminals 4Q-12 and 4Q-4 of the main body ECU connector.
- Standard Resistance:
- Below 1 Ω
Turn the ignition switch on (IG).
Turn the defogger switch ON.
Using a voltmeter, measure the voltage between terminal 4F-2 of the main body ECU connector and body ground.
- Standard Voltage:
- 10 to 14 V


