2005-2008 Yaris · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built from Aug 2005


1. INSTALL POWER OUTLET SOCKET COVER

  1. B117779
    Engage the 2 claws and install a new power outlet socket cover.


2. INSTALL POWER OUTLET SOCKET

  1. B117780
    Align the protrusion of the power outlet socket with the cutout of the power outlet socket cover and install the power outlet socket.

  1. Securely engage the claw.

  1. B117776
    Connect the power outlet connector.


3. CONNECT AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)

I101159
  1. Engage the 2 claws and connect the air inlet damper control cable.


4. CONNECT DEFROSTER DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)

I101158
  1. Engage the 2 claws and connect the defroster damper control cable.


5. CONNECT AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)

I101157
  1. Engage the 2 claws and connect the air mix control cable clamp.

  1. Connect the defroster damper control cable to the clamp.


6. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY LOWER CENTER (for Manual Air Conditioning System)

I101156
  1. Connect the 3 connectors and the clamp.

  1. I101155
    Engage the 3 clips and 2 claws and install the air conditioning panel.


7. INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)

I101169
  1. Connect the 2 connectors and the aspirator pipe and engage the clamp.

  1. I101591
    Engage the 3 clips and 2 claws and install the air conditioner control.


8. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY CENTER (w/ Cassette Tape Player)

E116764
  1. Engage the 4 clips and 2 claws and install the instrument cluster finish panel.


9. INSTALL INSTRUMENT CLUSTER FINISH PANEL

B132366E01
  1. Fit the 3 A claws of the instrument cluster finish panel into the upper instrument cluster finish panel center.

  1. B132367
    Engage the 4 claws and 5 clips and install the instrument cluster finish panel.


10. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

E107743
  1. with CD player

    1. Connect the connector.

    2. Engage the 4 claws and 3 clips and install the instrument panel finish panel end RH.

  1. E107744
    Except CD player

    1. Connect the connector.

    2. Engage the 5 claws and 3 clips and install the instrument panel finish panel end RH.


11. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

E107741
  1. with CD player

    1. Connect the connector.

    2. Engage the 4 claws and 3 clips and install the instrument panel finish panel end LH.

  1. E107742
    Except CD player

    1. Connect the connector.

    2. Engage the 5 claws and 3 clips and install the instrument panel finish panel end LH.


12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

← REMOVAL (from Aug 2005)PRECAUTION (from Aug 2005) →