2005-2008 Yaris · Service Manual BODY ELECTRICAL

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Aug 2005


CHECK DOOR LOCK FAIL-SAFE
  1. When a malfunction in the door control switch (for front driver door side) or door control switch (for center console side*) or driver side door key cylinder is detected, the door lock/unlock operation is disabled.
    *: Hatchback


CHECK ELECTRICAL DOOR LOCK OPERATION
  1. Check that all doors are locked and unlocked in accordance with the door control switch (for front driver door side) or door control switch (for center console side*) operation.
    *: Hatchback

  1. Check that all doors are locked and unlocked when the following operations are performed: 1) turn the driver side door key cylinder to the lock and unlock positions using the key, and 2) turn the front passenger side door key cylinder to the lock and unlock positions using the key.

    HINT:
    Doors cannot be locked or unlocked using the key when the ignition switch is on (IG) and the driver seat belt is fastened.

  1. Check the key lock-in prevention function.

    NOTICE:
    Perform this operation with the driver door window open to prevent the key from being locked inside the vehicle.


    1. Insert the ignition key into the ignition key cylinder (for vehicles without the entry and start system), or place the transmitter inside the vehicle (for vehicles with the entry and start system).

    2. Check that all doors are immediately unlocked when the driver side door lock knob is turned to the lock position with the driver door open.

    3. Check that all doors are immediately unlocked when the door control switch (for front driver door side) or door control switch (for center console side*) is turned to the lock position with the driver door open.
      *: Hatchback

    4. Check that all doors are unlocked when the driver door is closed after the driver door lock knob is held in the lock position for 2 seconds with the driver door open.

  1. Check the key-linked lock and unlock function.

    1. Check that the doors cannot be locked or unlocked using the key from outside the vehicle when the ignition switch is on (IG) and the driver seat belt is fastened.


CHECK DOUBLE LOCKING FUNCTION SYSTEM

NOTICE:
Never activate the double locking system when anyone is inside the vehicle. The doors cannot be opened from the inside of the vehicle. If the doors are locked accidentally, press the transmitter's UNLOCK switch.

  1. Check that the double locking system is set.

    1. Open all the windows.

    2. Turn the ignition switch on (IG).

    3. Open and close the driver side door, and make sure that all doors, including the back door, are closed securely.

    4. Press the transmitter LOCK switch twice within 5 seconds, and check that the hazard warning lights flash once at this times to indicate that the system has been set.

    5. Try to unlock all doors with the inside handle of the vehicle doors, and check that none of the doors unlock.

      CAUTION:
      1. The double locking system cannot be set without using the transmitter.
      2. The double locking system is not applicable to the back door.

  1. Check that the double locking system is canceled.

    1. Press the transmitter UNLOCK switch while the double locking system is set, and check that the hazard warning lights flash twice at this time to indicate that the system is canceled.

    2. Check that the doors can be opened by using both the inside and outside handles.

      CAUTION:
      If the battery of the transmitter is depleted, only the driver side door can be opened using the key. However, the theft deterrent system still remains on. The theft alarm will sound when the door is opened without using the transmitter.

← DIAGNOSTIC TROUBLE CODE CHART (from Aug 2005)B1249 Double Locking ECU Communication Stop (from Aug 2005) →