DTC CHECK / CLEAR
Troubleshooting · Vehicles built from Aug 2005


| CHECK DTC |
Connect the intelligent tester to the DLC3.
Turn the ignition switch on (IG) and turn the intelligent tester ON.
Read the DTC by following the prompts on the tester screen.
- HINT:
- Refer to the intelligent tester operator's manual for further details.
| CLEAR DTC (using the intelligent tester) |
Connect the intelligent tester to the DLC3.
Turn the ignition switch on (IG) and turn the intelligent tester ON.
Clear the DTC by following the prompts on the tester screen.
- HINT:
- Refer to the intelligent tester operator's manual for further details.
| CLEAR DTC (not using the intelligent tester) |
Remove the ECU-B fuse from the engine room relay block for more then 60 seconds, or disconnect the negative battery cable for more then 60 seconds.