INSTALLATION
Removal / installation · Vehicles built from Nov 2005
| 1.
INSTALL VACUUM REGULATING VALVE |
 |
Install the vacuum regulating valve with the 2 bolts.
-
Torque:
- 3.4 N*m{
35 kgf*cm
, 30 in.*lbf
}
- Connect the 2 vacuum hoses to the vacuum regulating valve.
Connect the vacuum regulating valve connector.
| 2.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
 |
-
Torque:
- 5.4 N*m{
55 kgf*cm
, 48 in.*lbf
}
| 3.
INSTALL ENGINE COVER SUB-ASSEMBLY NO. 1
|
 |
Engage the 4 pins and install engine cover No. 1.