2005-2008 Yaris · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built from Nov 2005


1. INSTALL CAMSHAFT POSITION SENSOR

  1. A098229
    Apply a light coat of gasoline or spindle oil to a new O-ring, then install it onto the camshaft position sensor.

  1. Apply a light coat of gasoline or spindle oil to the O-ring of the camshaft position sensor again, then install the camshaft position sensor with the bolt.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

  1. Connect the camshaft position sensor connector.


2. CHECK FOR ENGINE OIL LEAKAGE

3. INSTALL ENGINE COVER SUB-ASSEMBLY NO. 1

A125743
  1. Engage the 4 pins and install engine cover No. 1.


4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

← REMOVAL (from Nov 2005)COMPONENTS (from Nov 2005) →