2005-2008 Yaris · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Nov 2005


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE ENGINE COVER SUB-ASSEMBLY NO. 1

A125743
  1. Disengage the 4 pins and remove engine cover No. 1.


3. REMOVE CAMSHAFT POSITION SENSOR

  1. A125666
    Disconnect the camshaft position sensor connector.

  1. Remove the bolt and the camshaft position sensor.

  1. Remove the O-ring.

← ON-VEHICLE INSPECTION (from Nov 2005)INSTALLATION (from Nov 2005) →