2005-2008 Yaris · Service Manual ENGINE

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Nov 2005


INSPECT CAMSHAFT POSITION SENSOR

A125779E01
  1. Check the voltage.

    1. Disconnect the camshaft position sensor connector.

    2. Turn the ignition switch on (IG).

    3. Using a voltmeter, measure the voltage between the terminals on the harness side.

      Standard voltage:
      Tester Connection
      Specified Condition
      1 (EG) - 3 (+B)
      4.75 to 5.25 V

      If the voltage is not as specified, check the wire harness and ECM.

← COMPONENTS (from Nov 2005)REMOVAL (from Nov 2005) →