INSTALLATION
Removal / installation · Vehicles built from Nov 2005
| 1.
INSTALL CRANKSHAFT POSITION SENSOR |
 |
- Install the crankshaft position sensor with the bolt.
-
Torque:
- 8.0 N*m{
82 kgf*cm
, 71 in.*lbf
}
Connect the crankshaft position sensor connector.
| 2.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
 |
-
Torque:
- 5.4 N*m{
55 kgf*cm
, 8 in.*lbf
}