2005-2008 Yaris · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Nov 2005


INSPECT CRANKSHAFT POSITION SENSOR

  1. A098207E01
    Check the resistance.

    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance:
      Tester Connection
      Specified Condition
      1 (Ne+) - 2 (Ne-)
      1,630 to 2,740 Ω at cold
      1 (Ne+) - 2 (Ne-)
      2,065 to 3,225 Ω at hot

      HINT:
      Cold and Hot mean the temperature of the coils themselves. Cold is from -10 to 50°C (14 to 122°F) and Hot is from 50 to 100°C (122 to 212°F).

      If the result is not as specified, replace the crankshaft position sensor.

← REMOVAL (from Nov 2005)INSTALLATION (from Nov 2005) →