2005-2008 Yaris · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Nov 2005


INSPECT ENGINE COOLANT TEMPERATURE SENSOR

  1. A093604E06
    Check the resistance.

    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance:
      Tester Connection
      Specified Condition
      1 (E2) - 2 (THW)
      2.32 to 2.59 kΩ at 20°C (68°F)
      1 (E2) - 2 (THW)
      0.310 to 0.326 kΩ at 80°C (176°F)

      NOTICE:
      If checking the engine coolant temperature sensor in water, be careful not to allow water to intrude into the terminals. After checking, wipe the water off on the engine coolant temperature sensor.

      If the result is not as specified, replace the engine coolant temperature sensor.

← REMOVAL (from Nov 2005)INSTALLATION (from Nov 2005) →