REMOVAL
Removal / installation · Vehicles built from Nov 2005
| 1. REMOVE ENGINE UNDER COVER |
Remove the 5 bolts, 4 screws and 2 clips and remove the engine under cover.
| 2. REMOVE ENGINE COVER SUB-ASSEMBLY NO.1 |
![]() ![]() |
Disengage the 4 pins and remove engine cover No. 1.
| 3. REMOVE FAN AND GENERATOR V BELT |
![]() ![]() |
Remove the 3 bolts and clip, then separate the wire harness.
Loosen bolts A and B.

Remove the fan and generator V belt.


