INSPECTION
Inspection · Vehicles built from Nov 2005
| INSPECT FAN AND GENERATOR V BELT |
 |
Check the belt for wear, cracks and other signs of damage.
If any defects are found, replace the V belt.
- HINT:
- Replace the drive belt if any of the following defects are found:
- The belt is worn out and the wire is exposed.
- The cracks reach the wire in more than one place.
- The belt has pieces missing from the ribs.
- Check that the belt fits properly into the ribbed grooves.
- HINT:
- With your hand, confirm that the belt has not slipped out of the grooves on the bottom of the pulley.