2005-2008 Yaris · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Nov 2005


INSPECT INJECTION OR SUPPLY PUMP ASSEMBLY

A128763E01
  1. Check the resistance of the fuel metering unit.

    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance:
      Tester Connection
      Specified Condition
      1 - 2
      2.60 to 3.15 Ω at 20°C (68°F)

      If the result is not as specified, replace the supply pump assembly.

  1. Check the resistance of the fuel temperature sensor.

    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance:
      Tester Connection
      Specified Condition
      1 - 2
      13.92 to 17.01 Ω at -20°C (-4°F)
      1 - 2
      5.31 to 6.49 Ω at 0°C (32°F)
      1 - 2
      2.25 to 2.75 Ω at 20 °C (68°F)
      1 - 2
      1.06 to 1.29 Ω at 40°C (104°F)
      1 - 2
      0.54 to 0.66 Ω at 60°C (140°F)
      1 - 2
      0.29 to 0.36 Ω at 80 °C (176°F)
      1 - 2
      0.17 to 0.20 Ω at 100°C (212°F)

      If the result is not as specified, replace the supply pump assembly.

← REMOVAL (from Nov 2005)INSTALLATION (from Nov 2005) →