DISASSEMBLY
Removal / installation · Vehicles built from Aug 2005
| 1. REMOVE REAR BUMPER ENERGY ABSORBER LH (for G. C. C. Countries) |
Remove the clip.

Remove the 2 pieces of tape and the rear bumper energy absorber.
| 2. REMOVE REAR BUMPER ENERGY ABSORBER RH (for G. C. C. Countries) |
- HINT:
- Use the same procedure as for the LH side.
| 3. REMOVE LICENSE PLATE LIGHT ASSEMBLY |
except G. C. C. Countries:

Disengage the 6 claws and remove the license plate light.
for G. C. C. Countries:

Disengage the 2 claws and remove the license plate light.
